Associate Logout

Wireless Tag List

 

Special Options

These special options are normally assigned during "Associate a Tag" and stored in flash memory. After update, the tag will automatically "reboot." Options related to motion or temperature monitoring need to be re-applied by "enable monitoring", "arm."
Cancel

Wireless Settings (Advanced)

 
Wireless Settings Migration allows you to re-program the flash memory in each tag to
  1. use a different frequency to resolve interference problems, and
  2. fine tune the trade-off among range, battery life and response time.
Old Setting
New Setting
Cancel

Move Logged Data


Move logged temperature/hudmity and motion event data from an unpaired tag to an active tag.
Move from
Move to

Notification Settings

Save
Push Notifications
Email Reports

Cancel

Save
When out of range
Cancel

Account Settings

Save
Tag Managers
Manage IFTTT Connections
Cancel

Add a Tag Manager

Adding multiple tag managers to one account allows quickly switching between tag managers, managing more than 40 tags and covering wider area than a single tag manager can cover.

Add as clone of...

Using a tag manager as clone of another, is useful when moving tags from one location covered by one tag manager to another location covered by another. It is also useful when replacing a defective tag manager with a new one, without having to re-associate each tag. NOTE: Signal coverage of multiple cloned tag managers should NEVER overlap for reliable operation. Placing two cloned tag managers within 700 ft / 200m of each other will initially work but cause out of range problems after a few weeks.

Cancel

Save
When lost link to a tag - {0}: Tag name, {1}: Time since last update
When re-established link to a tag - {0}: Tag name, {1}: Time since last update (lost link duration)
When motion tag detected motion - {0}: Tag name, {1}: Orientation change, {5}: local time
When Infra-red (PIR) sensor detected motion - {0}: Tag name, {1}: local time
When motion tag or Infra-red (PIR) sensor times out - {0}: Tag name, {1}: local time
When door is opened - {0}: Tag name, {1}: Orientation change since armed, {5}: local time
When door is closed - {0}: Tag name, {1}: Orientation change since armed, {5}: local time
When door is open for too long - {0}: Tag name, {1}: Orientation change since armed, {2}: How long, {6}: local time
When temperature is too high - {0}: Tag name, {1}: Temperature in °F, {2}: Temperature in °C, {3}: Temperature in default unit
When temperature is too low - {0}: Tag name, {1}: Temperature in °F, {2}: Temperature in °C, {3}: Temperature in default unit
When temperature returned to normal - {0}: Tag name, {1}: Temperature in °F, {2}: Temperature in °C, {3}: Temperature in default unit
When tag battery is low - {0}: Tag name, {1}: latest battery voltage, {2}: configured low battery warning threshold
When humidity/moisture level is too high - {0}: Tag name, {1}: moisture level in %
When humidity/moisture level is too low - {0}: Tag name, {1}: moisture level in %
When humidity/moisture level returned to normal - {0}: Tag name, {1}: moisture level in %
When detected water - {0}: Tag name, {1}: local time
When no longer detected water - {0}: Tag name, {1}: local time
When it is too bright - {0}: Tag name, {1}: ambient light in lux
When it is too dark - {0}: Tag name, {1}: ambient light in lux
When brightness returned to normal - {0}: Tag name, {1}: ambient light in lux
Cancel

Save

Hint: You can use math expression enclosed between <% and %>. For example...

Cancel

Save
Display:
Cancel

Save
Units:
Cancel

Save
Cancel

Save
Light sensor detects motion when there is sudden change in brightness caused by moving the sensor abruptly.
Using IFTTT
Custom URL Calling
Cancel

Save
Cancel

Save
Water detect notification options
Using IFTTT
Custom URL Calling
Hardware configuration

To detect water, normally higher than 1MΩ is needed; use "Insensitive" if you plan to connect the terminal to a switch. Only one terminal can be configured to be "Analog". Unless you choose "Analog/water" the terminal set to Analog will always show water detected.

(Front view)
Cancel

Associate a Wireless Tag

Please pull out battery insulating tape from one new Wireless Tag. Light should be flashing on the Tag. Please remove the tape and associate a Tag one at a time.
For Water/Mositure Sensors... For Reed Sensors...

  • Do not leave more than one tag flashing.
  • Do not put the tag too close to the tag manager during this process.

Regulate temperature not at the thermostat, but at chosen Wireless Tag. Build historical temperature/humidity graph at your Thermostat. Run KumoApps such as 'turn off when window is left open', 'turn on when my phone gets close to a location.'

With IFTTT Connect you can associate a variety of smart home devices as Tags to be switched from inside the KumoApp scripts/rules.

Enable Wireless Tag IFTTT service to make your tag work with hundreds of other Internet connected devices. Create your recipe at ifttt.com/create

Regulate temperature not at the thermostat, but at chosen Wireless Tag. Run KumoApps such as 'set to away mode when window is left open', 'set to home mode when my phone gets close to a location.'

To link WeMo devices (not updated to Wemo account on your WiFi), launch the WirelessTag mobile app while connected to the same WiFi as the WeMo device.